Related Articles

 

Opening Doors to the Benefits of Lean Construction - Doors are everywhere, completely out of sight and out of...

 

Colleges and Universities as Prime Cyberattack Targets: Behind the Threat - When it comes to cyberattack targets, many think of...

 

Advanced IP Radio Systems for Campus Security - When it comes to campus security, radio systems play an...

 

Communications for Campus Security - As another school year approaches, security departments are...

 

Upgrading Campus History: Windows Provide Green Update to Older Structures - According to the United States Census Bureau, there are...

 

Protecting Student Belongings as Part of Campus Security Plan - Student security lives at or near the top of every...

 

Video Surveillance Management and Centralization: How Campuses Achieve Cost Savings While Keeping Students and Property Safe - The industry-wide migration to IP video surveillance over...

 

Choosing the Right Access Control Technology for Student Housing - One of the most important aspects of on-campus housing is...

 

Upgrading Your Campus to Higher Security Credentials - Keeping a university safe and secure is one of the most...

 

Come Together, Right Now: Advanced Lighting for a Forward-Thinking Campus - Paul McCartney and John Lennon had other thoughts in mind...

 

Life Safety, Security, & Operational Conflicts - Our world is full of threats. Unfortunately, some of those...

 

Situational Awareness: The Key to Smarter Campus Risk Management - My daughter Elizabeth starts college in a few weeks, so...

 

LED Lighting A Green Way To Improve Campus Safety - As college tuition continues to rise, so do the costs of...

 

Security and Solar Window Films: Campus Safety and Other Benefits - As universities beef up security on their campuses because...

 

A.L.I.C.E at Point Park University: Alert Lockdown, Inform, Counter, & Evacuate - A man calmly walks into the Academic Hall and enters the...

 

Video Insight Establishes $250,000 School Security Grant - A Pilot Program has been developed to help underfunded ...

 

Automating Attendance, Visitor and Asset Tracking in University Environments: Taking Attendance Like Never Before - Universities are constantly advancing technology and...

 

The Safety and Sustainability Factors of Filtered Fume Hoods, Ductless Fumed Hoods, and Ducted Fume Hoods - Fume hoods are a central component in most laboratories....

 

The Technology of Lightning Warning Systems - Lightning warning technology has evolved over the last 23...

 

7 Tips For Getting The Most Out of Your Analog Cameras With Video Encoders - Video encoders turn analog cameras into IP video - creating...

 

Campus Safety Budgeting: Improving Efficiency and Measuring ROI - When budgets are tight, accountability is crucial. As...

 

Security and Solar Window Films: Campus Safety and Other Benefits - As universities beef up security on their campuses because...

 

Life Safety, Security, & Operational Conflicts - Our world is full of threats. Unfortunately, some of those...

 

PCI Compliance & Questions of Security - Colleges and Universities strive for PCI compliance, but...

 

Enhancing Campus Wide Radio Communications - The traditional school year comes to a close, but...

 

Teaching and Technology: Regaining Key Control - A key part of providing a high-quality educational...

 

Addressing Top Five IT Security Challenges of Higher Education - Universities and colleges face the same IT security...

 

Private Universities are Getting Smart About Student ID Technology - Whether a card or mobile phone, credentials are becoming...

 

Archives > July 2017 > Understanding Testing Standards for High-Performance Entrances

Understanding Testing Standards for High-Performance Entrances

There is a growing need to create entrances in our educational facilities that are blast, bullet, intrusion and/ or storm resistant. It is sad to think that we live in a time where we need to design entrance solutions for keeping our students and campuses safe, but we must continually innovate to overcome the threats that present themselves in daily life.

By: Kenneth Bowditch

Within this growing segment of the industry, we find a new set of labels, terminology, and testing standards. At times these can get quite confusing and misleading. However, they do not need to be if you have a good understanding of a few key terms.

Proof vs. Resistant

Have you ever heard someone say that an object was Something Proof and in reality, it should have been Something Resistant? By definition, proof is "able to withstand something damaging; resistant." That makes sense, until you consider the definition of resistant: "Opposed to something; wanting to prevent something from happening." So, proof or resistant, tomato or tomahto? Do they mean the same thing?

testing standards doors pupn mag Not exactly. While bulletproof sounds more impressive than bullet resistant, using the term bulletproof is an absolute statement and is not exactly true. At the end of the day, if someone or something wants in, the laws of physics will work against you. If something is big enough, powerful enough, hard enough, wet enough, fast enough-you get the picture-it's coming in. For this reason, I would rather see the term "resistant" used in all descriptions having anything to do with bullet, blast, intrusion or storm rated entrance systems. Read on to find out why it's important to direct attention to the testing standards by which products are evaluated when explaining the levels of protection or comparing products.

Storm Resistant

Let's begin with looking at hurricane ratings. Most hurricane-resistant doors are required to meet at least one of following standards: ANSI (American National Standards Institute), ASTM (American Society for Testing and Materials), TAS (Testing Application Standard), IBC (International Building Code), or IRC (International Residential Code). Refer to the AHJ (Authority Having Jurisdiction) to determine which one is used in your area. Most test protocols will include static loads, cyclic loads, air infiltration, large missile impact, water infiltration and forced entry.

The most stringent of these requirements is approval in Miami-Dade County. If a product can make it through Miami-Dade's NOA (Notice of Acceptance) protocol (TAS 201, 202 and 203), it can most generally be submitted in other states or regions (such as the Florida Building Commission and Texas Department of Insurance) with a high degree of confidence in approval.

A lot of homework is required for an engineering team to determine how a product will perform under test conditions before sending it to the testing lab. This upfront work reduces the likelihood of a failure during testing. Water infiltration is an excellent example. Water is not our friend in the test lab. One drop of water that infiltrates a test specimen results in a failure. One important consideration to remember is that the size of the product that you intend to install cannot exceed the size of the specimen tested (although it can be smaller). The hardware/seals must be consistent with the configuration used in the approval. You can deviate from the approval only with permission from the AHJ.

Bullet Resistant (Ballistic)

door standards higher education pupn magDepending on the level of bullet resistance, there are several ratings by which products can be tested. There are a variety of testing methods, all of which are completed in a controlled environment at a certified test lab. The range of weapons varies from handguns to rifles, and the ratings are quite different depending on the standard to which you are testing. For example, you may hear someone refer to "Level 3," which has a different meaning depending on which testing standard is used. Level 3, UL 752, calls for a .44 magnum handgun. National Institute of Justice (NIJ) Level 3 calls for the use of a 7.62mm (.308 Winchester) rifle. So, as you can see, there is a difference. I have worked on several projects developing bullet-resistant doors using a fiberglass pultrusion process. Believe it or not, steel is not always the answer. When used properly, fiberglass has excellent ballistic properties without the concern of deterioration due to rust or corrosion.

Blast Resistant

In some cases, there is a blast requirement for exterior entrance systems. There are a couple of different approaches for a product to achieve a blast specification. 

1. Arena Testing: This is obviously the most interesting. As you can imagine by the name, this testing occurs outside in a controlled area, by setting off explosives to achieve the desired load and duration. The entrance system is instrumented to record the forces felt during the explosion. The advantage of using the arena test is that you are not limited to a product of a particular size. The downside with this method is that it is more difficult to obtain a specific pressure and duration due to the variation in explosive behavior.

2. Shock Tube: The shock tube is an instrument used to replicate and direct blast waves at a sensor or a model to simulate actual explosions and their effects, usually on a smaller scale. The advantage of using the shock tube is that you can repeat the test more accurately than arena testing. The disadvantage is that the size of the specimen is restricted by the size of the shock tube.

Intrusion Resistant

If you are looking for solutions that would slow down a perpetrator from gaining access to your buildings, one of the options is an intrusion-resistant entrance. The definition of intrusion is; "the act or an instance of intruding; an unwelcome visit." There are several test standards used depending on the approval. The most common are ASTM and UL, and the U.S. State Department forced entry test.

Depending on the data that you look at, the national average for the police to respond to a 911 call is between 6 and 10 minutes. The goal of an intrusion-resistant entrance system is to delay intruders from gaining access until the cavalry arrives. These systems may or may not be bullet resistant-but remember the object here is to delay the intruder from gaining access to the facility, not to stop a bullet.

There are two innovative variations of intrusion-resistant glazing that can be utilized for this requirement. One option is a patent pending product that slows down intruders up to twelve minutes before gaining access. This glass is a bit more expensive but provides all the benefits of a glass vision lite that an end user may prefer.

The second option is a clear polycarbonate that has a scratch resistant coating. I strongly suggest packing a lunch if you are trying to break through this material. You can literally go after it with a sledgehammer and not break it. This polycarbonate is an inexpensive solution for intrusion resistance.

It is important to note that the glazing material is only one aspect of an intrusion resistant system. The doors and vision lite kits used to hold this glazing material are just as important. They must all work as a system to counteract the threat. When selecting intrusion-resistant products, it is important that you select intrusion-resistant doors, frames, glazing, and vision lite kits. The vision lite kits are usually reinforced with more fasteners and material to allow the system to withstand a threat. I know what you're thinking: More fasteners? No one is going to buy that. Well, just because there are more fasteners doesn't mean you have to see them. There are companies that have developed clever ways of disguising their intrusion-resistant glazing kits so to the average person it does not look reinforced.

How do I know what level of protection is needed for an entrance?

To summarize all of this, the load results for HVHZ approved systems are calculated in pounds per square foot, but what you need to know is what approval is required from your AHJ. With ballistic systems, you need to understand the caliber of bullet that your entrance must withstand in an attack, that will dictate the level of protection required.

For blast protection, you will need to know the blast load the product needs to withstand, calculated pounds per square inch (psi), as well as the impulse calculated in pounds per square inch and milliseconds (psi-ms). For intrusion resistance, you need to know the amount of time that you want to hold a perpetrator at bay. To be successful when ordering these types of systems, you must take the time to understand the science behind the products that will protect you and your students. Understanding the requirements of your state or local jurisdictions insures that you have products that meet the requirements for the project.

 

 

About The Author
Kenneth Bowditch

is the Vice President of Engineering at Special-Lite, Inc. (special-lite.com) and has been a member of the Special-Lite engineering team for 10 years. Bowditch simultaneously serves as a Department Associate for the University of Florida, Engineering School of Sustainable Infrastructure & Environment

 

 

PUPN Magazine is a trademark of Flaherty Media, LLC, copyright 2017. PUPN Magazine and all contents are properties of Flaherty Media, LLC.